There are two types of rotary encoders: absolute and incremental. Absolute rotary encoders provide a coded angle information and avoid time consuming reference measurements and calculation routines in the controller. Incremental rotary encoders provide a pulse output signal and enable counters and PLC to calculate the position, speed and distance.

The Difference Between Absolute and Incremental Rotary Encoders
There are a few differences between absolute and incremental rotary encoders. Incremental encoders have output signals that repeat over the full range of motion. When the incremental encoder is turned on, the position of an incremental encoder is not known since the output signals are not unique to any singular position.

Absolute encoders have a unique value (voltage, binary count, etc) for each mechanical position. When an absolute encoder is turned on, the position of an absolute encoder is known. The similarities of both absolute and incremental encoders are form and the issues of count and directional information. They can be obtained from both absolute and incremental encoders equally.

Gurley offers three technologies for rotary encoders: incremental, true absolute and our patented Virtual Absolute(R) brand of scales.  For more information on these offerings, please click on one of the selections detailed above (both true absolute and Virtual Absolute are detailed in the Rotary Absolute section).  For general information on Virtual Absolute technology please visit www.virtualabsolute.com.